Home News DJI Mavic S and Pro Models Confirmed

DJI Mavic S and Pro Models Confirmed

by 9to5dji

FCC detail have shown there will be two models of the DJI Mavic ( on release anyway ). An S model and a Pro model. We also get a rough sketch of the shape of the RC in the same FCC documents.

Specification is still unknown but just over a day left to find out 🙂 We do find out its measurements ( in flight mode i assume ) – 303.3mm (L) x 249.5mm (W) x 75.2mm(H) – We also find out from the test report that an iPhone can be connected to it…

You can read more on the FCCID info HERE and HERE and HERE for the RC

DJI Mavic Pro ( Professional )
DJI Mavic Pro

DJI Mavic S ( Standard )
DJI Mavic S

We also get to know the model number of the new RC, GL200A and it looks like a Playstation 4 controller from the schematic below. Seems to have two buttons on the bottom ( similar to the C1 and C2 other DJI drones have ). It has a wheel on both ends also like the other drones. We also get to see that it runs at 5 volts and 2 amps.

DJI Mavic RC GL200A

DJI Mavic RC

DJI Mavic S DJI Mavic Pro

You may also like


Marco 13th October 2016 - 16:06

Can You tell me if the Mavic TAG will carry the Anatel logo and permission? This is necessary to fly in Brazil.

Many Thanks

Mavic 13th October 2016 - 16:17

Yes, the Mavic and the RC carry the Anatel logo in accordance with Brazilian Telecom Regulatory Compliance.

Steve 19th October 2016 - 19:39

It shows the Anatel Logo right in the picture posted.

Alex 19th October 2016 - 18:42

So, what are the differences between both models??

Edwin 20th October 2016 - 03:30

DJI came out with Phantom 3 Standard after Phantom 3 Professsional. So they may be planning a Mavic Standard in the same way.

EYE 20th October 2016 - 16:26

Mavic pro is so cheap that there was no need for a S


Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.